Dosing System (Optional); Scope Of Supply; Connection - Burkert 7616 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9.

dOsing sysTeM (OpTiOnal)

9.1.

scope of supply

Optional with 1 or 2 dosing unit(s) (24 V) in an aluminium housing
24 V power supply unit for the electrical power supply
Null modem cable for the connection to PC (COM Port / RS 232)
Control software
Control electronics
RS 232
Fig. 7:
Dosing system, dimensions in mm
14
Medium connections
2 1
Power supply
Power switch
english
Type 7616
Dosingsystem(Optional)
9.2.

connection

Use the null modem cable to connect the dosing system (RS 232)
to the PC.
Connect the power plug to the mains power supply.
Switch on the dosing system.
Start software ("pumpcontrol.exe").
Select COM Port (COM setup: Standard COM 1).
Begin the delivery process with "Start" of the respective dosing
unit (Pump 1 / Pump 2).
9.2.1.
Measures in case of a malfunction
Check COM setup or select a different port.
Check the polarity of the power supply adaptor.
Connect the mains power cable to the dosing unit.
Switch on the dosing system.
Only start the software after the dosing system is connected
properly and turned ON.
Check the flow direction.
Check whether a null modem cable is being used.

Publicité

Table des Matières
loading

Table des Matières