Burkert 7616 Manuel D'utilisation page 17

Type 7616
Dosingsystem(Optional)
panel "Bistable valves" / "Monostable valves"
The settings refer to optional hardware features. Further
information on request.
Ok
Save settings and close window
Cancel Leaving window without changes
Loads the device configuration from the
load
configuration file
save
Saves the device configuration (including the tuning
parameters) in the configuration file.
9.3.3. Window "pump tuning"
Seven time parameters are entered here T0...T6 [ms] for the control
of the dosing units; the frequency is determined by the pause.
pump tuning
Ok Save settings and close window
Cancel Leaving window without changes
Sets the time parameters back to the default
defaults
settings
See also the control diagram in chapter „Start-up /
Functions"
english
17