Soehnle MILANO PLUS Mode D'emploi page 10

4. Add 1 ­ 2 drops SOEHNLE
EN
fragrance oil (dia. 3).
5. Replace top part while ensu­
ring perfect fit (dia. 4).
6. Connect power supply unit
(dia. 5).
7. Place on a level surface (dia.
6).
8. Switch on:
a. On the diffuser: The switch
is located on one of the base
feet. Place hand on device
and push device toward the
direction of the switch. Push
several times to switch device
off (dia. 7).
b. Using the remote control:
Push key
Note: If there is no water in
the device, the illumination
can only be switched on using
the
key again stops the colour.
B. Setting up illumination
and nebulization
a. On the diffuser (Image 7):
Second push: nebulization off,
colour change stays on.
Third push: nebulization off
and current colour stopped.
8
(dia. 9).
key Pushing the
Fourth push: diffuser off
b. With the remote control:
Pushing the
current colour.
Pushing the
switches the illumination off.
Pushing the
switches the illumination back
to colour change.
Switch nebulization on and off
using the
Switch diffusor off using the
key.
Note: The remote control and
the receiver in the power sup­
ply unit's cord must have visu­
al contact (image 10).
Light and nebulization can be
controlled separately via the
respective keys.
If both keys are switched off,
the device is switched off
completely.
C. Cleaning
For reasons of hygiene the device
must be cleaned after each fil­
ling ­ at least every three days.
Before cleaning, dis connect the
unit from the mains.
key stops the
key again
key once more
key.