Eschenbach smartlux DIGITAL Mode D'emploi page 24

Setting the display mode
The.smartlux.DIGITAL.is.equipped.with.a.range.of.display.modes.so.that.you.can.achieve.the.best.
possible.image..If.you.press.the.contrast.button.(r).briefly.and.repeatedly,.you.will.run.through.
the.various.display.modes.from.true.colour.mode.through.increased.contrast.mode.black/white.
and.white/black.up.to.false.colour.display.black/yellow.and.yellow/black.
Switching the LED illumination on/off
There.are.two.LEDs.(i).on.the.underside.of.the.smartlux.DIGITAL.which.illuminate.the.subject.
material.to.enable.optimum.contrasting.and.true-colour.images..Under.certain.circumstances.
(e.g..glossy.subject.material).it.may.be.necessary.to.switch.the.LED.illumination.off.to.avoid.point.
reflections..
To.do.this,.press.and.hold.the.contrast.button.(r).for.3.seconds.
If.you.want.to.switch.the.LED.illumination.on.again,.press.and.hold.the.contrast.button.for.a.further.3.
seconds..The.LED.illumination.status.currently.set.will.be.displayed.at.the.top.screen.border.for.5.
seconds.
. LED.illumination.switched.on. .LED.illumination.switched.off
- 24 -
BDA_smartlux_DIGITAL_final_multi.indd 24 06.11.2012 18:53:40