Schematic Diagram For Bullet Varifocal Ip Camera - Urmet 1080P Série Manuel D'utilisation

3.3 1093/142M2

SCHEMATIC DIAGRAM FOR BULLET VARIFOCAL IP CAMERA

Items
①
Front cover
②
Camera body
③
Lens
④ Infrared lamp
⑤
Led body
⑥ Focusing level
⑦
Adjustment sleeves
⑧
Base with fixing holes
⑨
RJ45/POE cable and 12Vcc power jack
DS1093-176
It can prevent the IP camera from the irradiation of the sunlight.
It is fixed to the front cover through the set screw.
Lens of camera.
Infrared LED lamp.
Led for long distances.
They adjust focus and zoom length. Located inside the camera unscrewing the led body
They allow to adjust the angle of scene and the slant.
Fix the device at the installation location.
To connect the camera to the network (status led) and power it POE or using 12Vcc jack
Descriptions
39