Installation; Schematic Diagram For Bullet Ip Camera With Fixed Lens Built-In - Urmet 1080P Série Manuel D'utilisation

3

INSTALLATION

3.1 1093/139M2

SCHEMATIC DIAGRAM FOR BULLET IP CAMERA WITH FIXED LENS BUILT-IN

Items
①
Front cover
② Camera body
③
Lens
④
Infrared lamp
⑤
Lens cover
⑥
Adjustment sleeve
⑦
Slant adjustment allens
⑧ Base with fixing holes
⑨
RJ45/POE cable and 12Vcc power jack
DS1093-176
It can prevent the IP camera from the irradiation of the sunlight.
It is fixed to the front cover through the set screw.
Lens of camera
Infrared LED lamp
It is screwed in to the camera body, it allows to access lens and led
It allows to adjust the angle of scene.
They allow to adjust the horizontal and vertical camera slant.
Fix the device at the installation location.
It allows to connect the camera to the network (status led) and power it through POE or
using 12Vcc jack
Descriptions
37