Handling And Operation; Establishing A Connection To A Smartphone - SilverCrest SSBS 3.0 A1 Mode D'emploi

Handling and operation

Establishing a connection to a smartphone

Before you can use the selfie stick, you must first pair the remote
release 8 with a compatible smartphone via Bluetooth
NOTE
► This product supports the operating systems iOS 8.0
or higher and Android 6.0 or higher. As Android is an
open-source system, each manufacturer determines the
key assignment of its camera app themselves. On some
smartphones no image can be triggered with the original
camera app, and there may be various malfunctions when
pressing the
of the operating system to see whether the settings offer an
option for setting the volume control (+) as an additional
trigger button.
♦ Press and hold the
switch on the remote release 8. The operating LED 0 lights
up red once and then flashes blue every second. The remote
release 8 is now in pairing mode for approx.
1 minute. If you do not make the pairing within 1 minute,
the remote release 8 switches off automatically.
Activate the Bluetooth
♦
search for Bluetooth
description of how to do this in the operating instructions for
your smartphone.
♦ Select the entry SSBS 3.0 A1 from the list of found devices
on your smartphone to pair the two devices. If the connec-
tion is successful, the operating LED 0 goes out.
♦ To switch off the remote release 8, press and hold the
button 9 for approx. 3 seconds. The operating LED 0 briefly
flashes red three times before going out completely.
SSBS 3.0 A1
button q. In this case, check the settings
button 9 for about 3 seconds to
®
function on your smartphone and
®
devices. You can find a detailed
®
.
│
9 ■
GB