Stopping The Brew Process - Keurig Hot COMMERCIALE Série Manuel D'utilisation

P8 20162461 T5274_K150P_UCG_FINAL.pdf 4C(CMYK) ZB2319 2016-11-02 Size:8.5X5.5in
Setup & First Brew
SECTION 1
Place a mug on the Drip Tray Plate and
6.
8
fig.
select your brew size (fig. 11), then press
BREW (fig. 12).
NOTE: If you do not push the BREW Button in
12:30 PM WATER
LEvEL
60 seconds, the BREW Button will be disabled
to prevent accidental activation. Re-activate the
Ready
BREW Button by lifting and lowering the
Choose Your
Handle completely.
K-Cup Pod
®
& Lift Handle
7. There may be a short pause prior to coffee
being dispensed. The entire brew process
Español Français
lasts for approximately 1 minute and ends
with a burst of air to remove all liquid from
the K-Cup
CAUTION: There is extremely hot water in the
K-Cup
®
9
To avoid risk of injury, do not lift the Handle
fig.
or open the K-Cup
during the brew process.
8. The end of brew is indicated by "KEURIG
BREWED ENJOY."
Lift the Handle, remove and dispose
9.
of the used K-Cup
CAUTION: K-Cup
10. Enjoy your first cup of Keurig HOT
gourmet coffee, tea, hot cocoa, or
other beverage!
pod.
®
Pod Holder during the brew process.
Pod Assembly Housing
®
pod.
®
pod will be hot.
®
™
NOTE: After brewing a hot cocoa K-Cup
10
fig.
we recommend running a hot water brew
cycle without a K-Cup
Your brewer may display "HEATING
11.
PLEASE WAIT" as it heats water for the
next brew cycle.

Stopping the Brew Process

If you need to stop the brewing after the
process has started, press and release
the Power Switch to turn the brewer 'OFF.'
The flow of coffee, tea, hot cocoa, or other
beverage will stop and the heating element
and the LCD Screen will shut off.
may get less coffee, tea, hot cocoa, or other
beverage in your cup during your next brew.
11
fig.
We recommend that you perform a cleansing
brew with water only after a terminated brew.
Then your next brew will be the volume you
Place Mug,
have selected.
Select
Brew Size
4 Oz.
6 Oz. 8 Oz.
10 Oz. 12 Oz.
8
pod,
®
pod.
®
NOTE: You
12
fig.