Adding Water; Menu Controls & Indicators - Keurig Hot COMMERCIALE Série Manuel D'utilisation

P9 20162461 T5274_K150P_UCG_FINAL.pdf 4C(CMYK) ZB2319 2016-11-02 Size:8.5X5.5in

adding Water

Your brewer has been configured at the factory to be direct
plumbed, however, the brewer can also be converted into a pour
over model with a Cold Water Tank Spare Part. To order, please call
your Keurig Authorized Distributor.
Brewing Iced Beverages
Your iced tea and iced coffee taste best when fresh-brewed hot over ice.
1. Fill a 16 oz. mug (do not use glass) to the top with ice and place a K-Cup
pod into your brewer.
2. Select your brew size, we recommend selecting a 6 oz. or 8 oz. brew.
Press the BREW Button.
3. Stir and enjoy!
IMPORTANT: Do not brew into a cup made of glass. Doing so may cause the
glass to crack or break.
Brewing hot Water
Your brewer is able to produce hot water for use
in cooking, making soups, oatmeal, etc. Simply lift
and lower the Handle on the brewer without adding
a K-Cup pod. The BREW Button will flash. Be
®
sure to have a mug on the Drip Tray Plate and then
press the BREW Button.
SECTION 2
Menu Controls & Indicators
Menu controls
To enter the Menu Mode the brewer should
13
fig.
be plugged in and the power must be off.
Press and hold your finger on the display for
about 10 seconds while pressing and releasing
the Power Switch (fig. 13). Once the Menu Screen
®
appears (fig. 14) remove your finger.
Press any line item to enter the set up for that
particular feature. Please reference the Menu
Navigation on page 10.
If you are experiencing any problems with your
10 seconds
brewer, please contact your Keurig Authorized
Distributor.
14
fig.
Home
Clock
Brew Temp
Brew Size(s)
Auto OFF
ON/OFF Time
Language
Contact
9