Section 3 - Cleaning & Maintenance Cleaning - Keurig Hot COMMERCIALE Série Manuel D'utilisation

P14 20162461 T5274_K150P_UCG_FINAL.pdf 4C(CMYK) ZB2319 2016-11-02 Size:8.5X5.5in
SECTION 2 Menu Controls & Indicators
b. Press "OK" to save your changes and
23
fig.
return to the Main Contact Screen.
NOTE: Pressing the Back Arrow Key will
return to the Main Contact Screen without
PHONE #
saving changes.
1 2 3
Press the Middle (Phone Number) Box. The
3.
4 5 6
Numeral Keypad Mode will appear along
with the current information (fig. 23).
7 8 9
0
Delete Space
a. Delete current phone number, if any, and
enter new information using the Keypad
aBc
OK
abc
123
b. Press "OK" to save your changes and
return to the Main Contact Screen.
24
fig.
Press the Lower Box. This box can be
4.
customized to contain any information
such as web/email address, contact
name, etc (fig. 24).
WWW.KEURIG.COM
ABC DEF a. Delete or enter new information using
the Keypad.
GHI JKL MNO
PQRS TUV WXYZ
b. Press "OK" to save your changes and
. , - return to the Main Contact Screen.
Delete Space
aBc
OK c. In the Main Contact Screen (fig. 21), press
abc
123
"OK" to save the updated screen as the
default and return to the Menu Screen.
The brewer is now fully programmed. Press "HOME" on the Menu Screen
to return your brewer to its idle state.
SECTION 3
cleaning external Parts
Regular cleaning of the brewer's external components is recommended.
The following section provides instruction for standard cleaning procedures.
For in-depth NSF certified instructions, please refer to the Cleaning and
Sanitization Guide.
Never immerse the brewer in water or other liquids. The Housing
1.
and other external components may be cleaned with a damp, soapy,
lint-free, non-abrasive cloth.
2. The Drip Tray can accumulate up to 12 oz. of overflow. The Drip Tray
.
and Drip Tray Plate should be periodically inspected and rinsed clean.
To remove the Drip Tray Assembly, simply slide it toward you, keeping it
level at all times to avoid spilling. The Drip Tray and Drip Tray Plate
should not be placed in the dishwasher. They should be cleaned with a
damp, soapy, lint-free, non-abrasive cloth and rinsed thoroughly.
25
fig.
14
Cleaning & Maintenance
cleaning the K-cup Pod
®
holder assembly
The K-Cup Pod
1. Cleaning the Parts — ®
Holder Assembly can be placed onto the
top shelf of a dishwasher.
NOTE: Use low
temperature cycles in the dishwasher.
To remove the K-Cup Pod Holder
®
Assembly from the brewer, open the
cover by lifting the Handle.