Setting The Clock; Programming Brew Temperature - Keurig Hot COMMERCIALE Série Manuel D'utilisation

P11 20162461 T5274_K150P_UCG_FINAL.pdf 4C(CMYK) ZB2319 2016-11-02 Size:8.5X5.5in

Setting the clock

Setting the clock is optional. When the clock is set, the time will appear
on the LCD Home Screen.
NOTE: You must set the clock if you will be
programming the Auto On/Off Time feature.
From the Menu Mode, press "CLOCK."
1.
15
fig.
The set clock screen will display
2.
"DISABLED" if the brewer is new or if
electrical power has been interrupted.
Clock
Press "DISABLED" to set a time. Press "H"
repeatedly to advance the hour in steps or
12:00 AM
hold it down to scroll through the hours
H M
quickly. When you have set the hour then
press the "M" to set the minutes, press
repeatedly to advance by a minute each time
OK
or keep it pressed to scroll quickly (fig. 15).
3. Press "OK" when you are finished.
The clock is now set.
The correct time should now be displayed on
4.
the LCD Home Screen.
NOTE: If power is interrupted to the brewer, follow the procedure above
to reset the time as the clock will not be visible. Brew size and brew
temperature menu settings will be restored automatically. All other
settings will be restored automatically after clock is set.
NOTE: To disable the clock, press the time. However, the 'On/Off' time setting
will also be disabled.
Programming Brew Temperature (188° – 198° F)
The brewer brews at a preset temperature of 193˚F. You can adjust this
temperature up or down by 5˚. Simply follow the instructions below.
1.
14 16
fig. fig.
"BREW TEMP."
2.
Temperature
193°F
- +
3 .
OK
4.
11
From the Menu Mode, press
The LCD Screen will now display the
Brew Temperature programming
options (fig. 16). The temperature 193˚F
(initial setting) will be displayed at the
top of the LCD Screen to indicate the
current temperature setting.
Press the + symbol to increase the
temperature and the – symbol to lower
the temperature one degree at a time.
Once you have reached your desired brew
temperature, press "OK." The brew
temperature is now programmed.
NOTE: At high altitudes (over 5,000 feet)
if boiling occurs, use the temperature
adjustment (-5 ) to lower the temperature.
°