English; Technical Data / Device Description / Safety Warnings / Specified Conditions Of Use / Emergency Procedure / Symbols / Maintenance / Disposal / Guarantee / Service; Specified Conditions Of Use - Güde GUB 500 Traduction Du Mode D'emploi D'origine

ENGLISH

Technical Data
Universal brush
Art. No
Service connection
Frequency
Safety class
Degree of protection IP
Motor power (P1)
Engine speed
Working width Brush
Brush diameter
min. Working handle height
max. Working handle height
Length of connection cable
Net/gross weight
Noise details
Sound pressure level L 1)
pA
Measured sound power level L
Guaranteed sound power level L
Measured according to 1)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 62841-1
Vibration emission value a
Uncertainty K = 1,5 m/s
2
Warning: The declared vibration total value(s) and the declared noise emission value(s) have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value(s) and the declared noise emission value(s) may also be used in a preliminary
assessment of exposure.
The vibration and noise emissions during actual use of the power tool can differ from the declared values depen-
ding on the ways in which the tool is used especially what kind of workpiece is processed.
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual condi-
tions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
Read and understand the operating
instructions before using the appliance.
Familiarise with the control elements
and how to use the appliance properly. Observe all the
safety measures listed in the instructions. Behave
responsibly towards other people.
The operator is responsible for accidents or risks to third
parties..
In case of any doubts about connection and operation
refer please to our customer center
16
2)
WA
2)
WA
EN 62841-1 ; 2) 2000/14/EC�2005/88 EC; Uncertainty K = 3 dB (A);
h

Specified Conditions of Use

The joint cleaner is intended solely for removing moss from
between uncoated concrete paving stones and concrete
slabs.
Not observing general regulations in force and instructions
from this manual does not make the manufacturer liable
for damages.
GUB 500
94423
230 V
50 Hz
II
X0
500 W
600 - 1300 min -1
160 mm
100 mm
980 mm
1280 mm
35 cm
3,6 kg/ 4,4 kg
83,7 dB(A)
94,7 dB (A)
98 dB (A)
3,390 m/s 2