LEM HEME GEO 30 Manuel D'utilisation page 14

Memory and Alarm Functions
R
LOOP
NOTE: If the HI value is set at OL, or the LO value is set at 0, the ALARM
function will not be performed. So they are method to disable one of the HI or
LO alarm.
NOTE: The HI value can't be smaller than the low value. And the LO value can't
be larger than the HI value. HI value will be adjusted to LO value plus 1 when
rollover occurs. The maximum value of LO value is HI value minus 1.
NOTE: If data logging is progressing, sound of beeping will be disabled to save
battery power. But the LCD still shows the warning letters of "HI—" or "LO—".
NOTE: The values for the high and low alarm are stored in the memory. They
are restored when the power is turned on.
14 HEME GEO 30
SO8130Z Rev. B