Read The Data Stored In Memory; Clear Data Memory; Cancel The Auto Power Off - LEM HEME GEO 30 Manuel D'utilisation

Memory and Alarm Functions
6.4

Read the Data Stored in Memory

1. Press the FUNC button until a symbol of "NO." is shown in LCD. The
current record number is shown in the upper row of LCD. And the data is
shown in the lower row of LCD.
2. Press the ▲ or ▼ button to read the next/previous data,
3. If the users hold the ▲ or ▼ button longer, the record number will be
incremented/decremented faster. The record number will roll over when the
last/first record is reached.
6.5

Clear Data Memory

Press and hold the REC button, then turn the power on. Letters of "CL" will be shown to
indicate that memory is cleared.
6.6

Cancel the Auto Power Off

When the unit is turned on, a symbol of AP is displayed in LCD. That means the unit
will turn itself off in about 4 to 6 minutes. To cancel this function, user can hold the
FUNC button, then turn the power on. Symbol of AP will not be displayed in LCD.
16 HEME GEO 30
SO8130Z Rev. B