12
UK/IE
3. Guide the shoulder belt over the blue part through the shoulder belt hook at the
rear side of the seat shell.
4. Tighten the 3-point belt by pulling the belt through the hip belt hooks and
through the shoulder belt hook until it is really tight.
5. Leave the carrying handle in carrying position.
6. Positioned in the back seat of the vehicle, you should push the front seat of the
vehicle backwards, so that it is in contact with the child seat. Positioned in the
front seat , you should push the front seat forwards, so that the child seat is in
contact with the dashboard. If this is not possible, leave a space of minimum
25 cm between child seat and back rest of the front seat or dashboard.
Stokke® iZi Go™ by BeSafe®