Agu Octopy FP7 Mode D'emploi page 81

• Clean the device after each use.
• Never immerse the main unit in water.
• Do not use abrasive cleaners.
• Never pour bleach or chemical sterilizing solutions/tablets into the
device.
DEVICE CLEANING PROCESS
Always remove the plug from the mains and remove the blender bowl.
1
Remove the bowl cover of the blender bowl.
2
Remove the blades as shown in the figure below.
Rinse all parts under a stream of warm water and install all the parts back.
ATTENTION
Clean all parts that come into contact with food in hot water with the addi-
tion of detergent after each use.
All parts except the main unit can be washed in a dishwasher.
• If necessary, use a dry cloth to clean the main unit.
• Check the water container and clean it if necessary (see the section
«Instruction for cleaning the water container»).
• Check the steam outlet and clean it if necessary.
• Always keep the water container dry.
EN
81