Agu Octopy FP7 Mode D'emploi page 70

4 Install the bowl in the main unit and turn it counterclockwise until it stops.
ATTENTION
Blade is always kept in the blender bowl for all operation modes.
If you need to cook two products at a time:
1
Fill the container with water, not less than the mark «100 ml» and not
exceeding the mark «MAX» (280 ml) on the left side of the device.
2
Cut the foods and place it into the steaming basket (9).
3
Place the steaming basket (9) into the bowl (6).
4
Install the bowl in the main unit and turn it counterclockwise until it stops.
5
Then place another foods in the measuring cup (7) and secure the strain-
er (8) (place it in the measuring cup and turn it counterclockwise).
6
After that, place the measuring cup over the basket.
ATTENTION
The measuring cup is not fixed rigidly in the basket. Be careful with the
device in this configuration.
7
Press the steamer button
You can press the buttons
time from 1 minute to 30 minutes. When the setting is completed, press
to start the cooking process. If you want to pause cooking, press this
button again.
By pressing the button
mode is set by default).
70
4
. The default working period is 20 minutes.
to increase and decrease the steaming
two power modes can be selected (high power of the