Agu Octopy FP7 Mode D'emploi page 74

BLENDER MODE
1
Place the cooked or fresh food directly into the blender bowl.
2
Install the splash cover (5) and close the bowl cover (4). the protruding
element of the splash cover should be inserted into the round hole in the
bowl side.
1
3
Place the bowl on the base and secure it in place.
4
Select the blender mode by pressing the button
NOTE
By pressing this button again, you can select the blade rotation speed.
5 Press the buttons
6 To start the blender mode, press
you need to press this button again.
NOTE
The volume of all ingredients inside the blender bowl should not exceed
300 ml.
ATTENTION
The use of a blender without load is not allowed. make sure that there are
foods in the bowl.
Before using the mixing function, make sure that the blender bowl is
installed correctly*.
*Note: the inlet on the side of the blender bowl must match exactly with the
steam output on the Food processor.
74
2
3
to select the number of cycles from 1 to 5.
. If you want to pause the process,
MAX
300 ml
4
.