Handling - Canon imageRUNNER 2202N Guide Rapide

IMPORTANT
Leave sufficient space around the power plug so
that it can be unplugged easily. If objects are placed
around the power plug, you will be unable to unplug
it in an emergency.

Handling

WARNING
• Do not attempt to disassemble or modify the
machine. There are high-temperature and high-
voltage components inside the machine which may
result in a fire or electrical shock.
• If the machine makes strange noises, or gives off
smoke, heat, or strange smells, immediately turn
OFF the main power switch, and disconnect the
power cord from the power outlet. Then, contact
your local authorized Canon dealer. Continued use
of the machine in this condition may result in a fire
or electrical shock.
• Do not use highly flammable sprays near the
machine. If gas from these sprays comes into
contact with the electrical components inside the
machine, it may result in a fire or electrical shock.
• To avoid damage to the power cord and creating a
fire hazard, always turn OFF the main power switch,
and unplug the interface cable when moving the
machine. Otherwise, the power cord or interface
cable may be damaged, resulting in a fire or
electrical shock.
• Make sure that the power plug is firmly inserted
into the power outlet if the machine was moved.
Do not use the machine while the connection is
loose, as doing so may cause a fire.
• Do not drop paper clips, staples, or other metal
objects inside the machine. Also, do not spill water,
liquids, or flammable substances (alcohol, benzene,
paint thinner, etc.) inside the machine. If these items
come into contact with a high-voltage area inside
the machine, it may result in a fire or electrical
shock. If these items are dropped or spilled inside
the machine, immediately turn OFF the main power
switch, and disconnect the power cord from the
power outlet. Then, contact your local authorized
Canon dealer.
• Do not use this product for uses other than as a
digital multitasking machine.
CAUTION
• Do not place heavy objects on the machine, as they
may tip over or fall resulting in personal injury.
• Close the feeder/platen cover gently to avoid
catching your hands, as this may result in personal
injury.
52
Important Safety Instructions
• Do not press down hard on the feeder/platen cover
when using the platen glass to make copies of thick
books. Doing so may damage the platen glass and
result in personal injury.
• Paper that has just been output from the machine
may be hot. Be careful when removing or aligning
paper from the output tray. Touching paper right
after it is output may result in low-temperature
burns.
• Do not place your hands, hair, clothing, etc., near
the exit and feed rollers. Even if the machine is not
in operation, your hands, hair, or clothing may get
caught in the rollers, which may result in personal
injury or damage if the machine suddenly starts
printing.
• Do not insert your hand into the machine while the
drawer is removed, as this may result in personal
injury.
• The laser beam can be harmful to human bodies.
Since radiation emitted inside the product is
completely confined within protective housings
and external covers, the laser beam cannot
escape from the machine during any phase of
user operation. Read the following remarks and
instructions for safety.
- Never open covers other than those instructed in
the manuals for this machine.
- Do not remove the following caution label which
is attached to the machine. If the label has been
removed, contact your local authorized Canon
dealer.