Fixing The Actuator Plate; Setting The Flushing Time For The Main Flush Via The Membrane Keypad - DURAVIT DuraSystem Série Notice D'utilisation

Setting the flushing time for the main flush via the membrane keypad

You can increase or decrease the duration of the main flush by pressing "time+" or
"time-" on the membrane keypad (see table 1: Setting the main flush).
range
time
The status LED flashes 5 times in succession if you have reached the maximum or
minimum range.
Main flush
Table 1: Setting the main flush
40
2
1
Factory settings
Approx. 6 sec.

Fixing the actuator plate

> Position the actuator plate at the bottom.
> Press it firmly upwards.
> Press the "time+" setting button if you
want to increase the flushing duration.
> Press the "time-" setting button if you
want to decrease the flushing duration.
The status LED flashes twice each time you
press the button. The flushing duration is
increased/decreased by the corresponding
steps.
Approx. 2 to 10 sec.
(9 steps)
Setting range