LENCO LS-410 Manuel De L'utilisateur page 13

1. Gently push and turn the counterweight
onto the rear of the tonearm (with the
dial facing toward the front of the
turntable).
2. Pull the protector straight forward to
remove it.
NOTE: Applying a downward force may
cause the stylus to come off the body.
Only low volume is output if the stylus
has come off, or is about to come off, so
refer to "Replacing the stylus" to
reattach the stylus correctly.
EN
CAREFUL!
3. Remove the tie-wrap and unlock the tonearm.
4. Lower the tonearm lift lever and position the cartridge in the space
between the tonearm rest and platter.
5. Carefully rotate the counterweight until the tonearm achieves a
neutral balance. The tonearm should return to this balanced position
if it is moved up or down. This adjustment must be done carefully.
EN
CAREFUL!
12