How To Adjust The Temperature For Different Requirements - Bertazzoni REF24RCPIXL Mode D'emploi

4. APPLIANCE SWITCHING ON
Each time the appliance is switched on it goes
through a self-diagnosis procedure lasting
three minutes before completely starting up.
4.2 How to adjust the temperature for
different requirements.
Each model has been carefully tested before leaving
the factory and is adjusted in such a way to ensure
high performance and low consumption.
Usually, it is not necessary on modify the settings.
How it looks on the home screen:
Fridge
+
Compartment
Modify the temperatures compartment
How to modify the Fridge compartment
temperature.
Functions
4
+
°C
Settings
0
OFF
+ 1
+ 2 °C
+ 3
OK
+ 4
10
4
Preset
temperature
°C
1) Home screen.
Touch the icon of
fridge compartement.
2) Scoll up/down to
select the desired
temperature
fridge from +1°C
to +8°C (from 34°F
to 46°F)
0
OFF
+ 1
+ 2 °C
+ 3
OK
+ 4
The temperature shown can vary slightly in
respect to the set temperature following
frequent openings of the doors or insertion
of room temperature foods or large
quantities of foods.
6 to 12 hours are necessary to reach the
selected temperature.
Padlock icon.
The padlock icon shows up when the temperatu-
res are set up.
The padlock open/close shows that it is or isn't
possible to modify the compartment's tempera-
tures anymore.
Usually an open yellow padlock can be seen
open; in that case you can scroll up or down with
a finger on the display, select the desired tempe-
rature and press OK for confirming.
0
OFF
+ 1
+ 2
+ 3
+ 4
Whereas a closed padlock can be seen if the
user has activated some functions that modify
the settings of the refrigerator therefore the
user in that situation will not be able anymore to
change the temperature of the compartments.
3) Touch the icon ok
to confirm the desi-
der temperature.
°C
OK