Renkforce 754389 Notice D'emploi page 43

0
+ 4-8 digit code +
0 23456
Example: +

+ 2-digit user number + 4-8-digit code +
The user number must be 2-digit (00 to 99). Thus, up to 100 different user codes can
be programmed.
 0
Example: +
2
+ 1-digit user number + 4-8-digit code +
2 7
Example: +
33333
The user number must be 1-digit (0 to 9). Thus, up to 10 different user numbers can be
programmed that can trigger an access lock.
If the code for the access lock is entered later in regular operation, it can only
be revoked with repeated input of the code.
While the access lock is activated (red LED remains lit), none of the user codes
can activate the relay in the code lock.
This function is used, e.g., when access, e.g. to an office, is to be prevented at
night or during specific days.
#
= Programme master code
+
76
+
33333
+
#
= Set master code to 123456
#
= Programme user code
#
+ = Set user number 8 to Code 9876
#
= Programme code for access lock
#
+ = Set access lock for user number 7 to code
43