Renkforce 754389 Notice D'emploi page 36

A
B
N.O.
B
N.O.
A Power supply (e.g. plug-in mains adapter 12 V/DC)
B Door opener button (if more than 1 button is needed, they must be switched in
parallel)
C Door opener
D Protective diode (in the scope of delivery of the code lock)
E Depending on construction type of the door opener, either use connection „N.O."
or „N.C." of the code lock („Fail-Secure" => „N.O.", „Fail-Safe" => „N.C.").
„Fail-Secure" door opener: It only releases the closure latch if its operating voltage
is present (common build). Connect it to the connection „N.O.".
„Fail-Safe" door opener: This releases the closure latch when the operating voltage
is missing (rare build, e.g. used for escape route doors since the door can be opened
at power outage). Connect it to the connection „N.C.".
36
-
+
OUTPUT 1
12-24 V
N.C. COM. N.O.
AC/DC
E
N.C. N.O.
EG
IN
C
D