Input, Output And Control Section - dB Technologies SUB615 Manuel D'utilisation

INPUT, OUTPUT AND CONTROL SECTION

1. INPUTS
XLR (balanced) input connectors. They may be used for mono or stereo connection. For further details
concerning connection, refer to INPUT CONNECTIONS AND AUDIO DAISY CHAIN.
2. OUTPUTS
XLR (balanced) output connectors. They may be used for mono or stereo connection. For further details
concerning connection, refer to INPUT CONNECTIONS AND AUDIO DAISY CHAIN.
3. Subwoofer Level
Rotary switch to adjust output audio level.
4. Outputs Mode
Selector allowing to set the type of output signal (Link/Xover). It acts on the daisy-chained signal from
OUTPUT connectors [2].
5. Polarity and Subwoofer Mode buttons
Buttons allowing to control (Normal or Reverse) Polarity and the type of output filtering (Flat, i.e. without
equalisation, Boosted, i.e. low frequencies are emphasised).
6. LED (Limiter, Signal/ON)
Indicator LEDs. The Limiter LED turns on when the internal protection circuit is triggered, while Signal/ON
indicates subwoofer power-up as well as the presence of an input audio signal.
SUB 615 - SUB618
24
English
Cod. 420120251 REV. 1.0