Input, Output And Control Section - dB Technologies LVX XM12 Mode D'emploi

English

INPUT, OUTPUT AND CONTROL SECTION

1. SERVICE DATA USB PORT
This standard Mini-USB Type-B port enables user to update
product firmware using a PC and USB BURNER MANAGER.
More details are available at http://www.dbtechnologies.com
under "DOWNLOADS" and in section FIRMWARE UPDATES.
2. INDICATOR LEDs
The "Limiter" and "Signal / ON" LEDs provide useful
indications about system status. The "Limiter" LED indicates
when the internal protection circuitry is active before a sound
distortion condition occurs. The "Signal / ON" LED turns on
when the module is powered on and indicates that an audio
signal is present.
3. AUDIO INPUT SENSITIVITY WITH LINE/MIC SELECTOR
AUDIO INPUT SENSITIVITY controls input level. The connected selector toggles input type between MIC
(microphone input) and LINE (line/mixer input).
4. INPUT
The hybrid Neutrik connector accepts both an unbalanced TRS jack and a balanced XLR connector.
®
5. "LINK" OUTPUT
Balanced XLR output intended to send the audio signal to another amplified speaker.
6. DSP PRESET ROTARY SWITCH
8-position rotary switch to set monitor equalisation using presets
LVX XM12 Cod. 420120240 REV.1.0
26