Dishwasher Setup - Gaggenau DF 260 Notice D'utilisation

Dishwasher setup

The dishwasher requires soft water to ensure proper washing results.
Your appliance is equipped with an internal water softening system.
However, if you have a household water softening system, you will not
need to use this softening system.
The required amount of salt depends on the degree of hardness of your
tap water (See table for more information).
For the water softening system to function properly, it will need to use
dishwasher water softener salt .The amount of salt dispensed can be set
.
Open the door.
Turn the unit on using the ON/OFF button .
A
Release both buttons.
Press "B" to select the desired setting.
To change the setting,
C
Save the selected language by pressing the START button.
Close the door.
The strip will be included in the detergent sample kit
Dip briefly the test strip into tap water for one
second, shake off excess water compare after 1
min.
START button until the display
Establishing the water
hardness
After one minute the red
dicoloration of the test
areas will show you the
correct setting.
0
1
2
3
4
water hardness at
SAMPLE TEST STRIP
Setting of
Water Fill with Salt
Alignment of
Softening Fill salt into the salt
Unit container
0
0
2
4
6
regeneration
no
no
yes
yes
yes
6