Self Help - Gaggenau DF 260 Notice D'utilisation

Problem Cause
Dishwasher 1. Door may not be properly latched.
does not start 2. Unit may not be turned on.
3. Unit not reset or previous cycle not completed.
4. Delay start engaged.
5.
6.
7.
ing a cycle.
8. Water supply may not be turned on
Dishwasher
Display does 1.
not illuminate tripped.
or console 2. Door not closed or latched.
lights are not
on door, the display only illuminates when the door is opened and
controls are visible.
Dishwasher 1. Incoming water is not warm enough.
seems to run a 2.
3.
4. Dishwasher connected to cold water supply.
Dishes aren't 1. Spray arm movement is obstructed.
2. Spray arm nozzles clogged.
enough 3.
4. Filters could be clogged.
5. Dishes are nested or loaded too close together.
6.
Dishes are not 1.
enough 2.
3. Selected cycle does not include drying.
1.
washer.
2.
3.
4.
washer.
5. Drain hose is obstructed.

SELF HELP

1. Shut the door completely.
2. Press the main power switch to turn unit on.
3.
manual.
-
4.
5. Check circuit breaker.
6.
-
7. Select a cycle and close the door.
.
8. Check and turn on water supply.
-
1.
2. Ensure that door is properly latched and completely closed.
1.
to the dishwasher.
-
2.
to ensure a good wash when heavy soil is detected.
3. Add rinse agent.
4.
1.
spray arms.
2.
manual.
3. Increase or decrease detergent depending on the water hard-
4.
5.
manual.
6.
- 1.
2.
3.
- 1.
2.
3.
-
the dishes.
4.
5.
personnel.
-
-
-
19