Downloading Settings To The Cycle Trainer; Uploading Rides To Training Peaks - Timex Cycle Trainer 2.0 Manuel D'utilisation

ConneCting the CyCle trainer
1. Insert the large USB plug into a USB port on the computer.
2. Insert the small USB plug into the port on the back of the Cycle Trainer.
3. Turn on the Cycle Trainer.
4. When the CONNECT TO PC? message displays, highlight YES, then press ENTER.
5. Open the Device Agent.
DoWnloaDing the lateSt FirmWare
1. In the Device Agent, click settings.
The Device Agent checks for new firmware versions.
2. If new firmware is available, click download now.
The new firmware download link displays.
3. Click the download link and save the file to your computer.
Saving CyCle trainer SettingS
When you upgrade the firmware, your configuration settings are erased from the device. To preserve them,
save the settings so you can restore them once the firmware is upgraded.
1. In the Device Agent, click Configure, then click gps.
2. Click export.
3. Name the settings file and save it to your computer.
applying neW FirmWare to the CyCle trainer
1. On the Cycle Trainer, hold
2. Highlight CONFIGURATION, then press ENTER.
3. Highlight SYSTEM UPGRAD, then press ENTER.
4. In the Device Agent, click file, then click update device.
5. When prompted, select the firmware file you saved to your computer.
A progress bar displays on the Cycle Trainer.
ImporTanT: Do not disconnect the Cycle Trainer from the computer or interrupt the upgrade process
before it is completed.
The Cycle Trainer will shut down when the upgrade is complete.
reStoring SaveD SettingS
1. Turn on the Cycle Trainer.
2. When the CONNECT TO PC? message displays, highlight YES, then press ENTER.
3. In the Device Agent, click settings.
4. Click Configure, then click gps.
5. Click Import.
6. Select the settings file you saved to your computer, then click save.

doWnloadIng seTTIngs To The CYCle TraIner

Make changes to Cycle Trainer settings from the Device Agent, and then download those settings to the
device.
1. Connect the Cycle Trainer to the computer as described in
2. In the Device Agent, click Configure.
3. In the Device Agent, change settings, then click save.
4. When the setting transfer is complete, close the Device Agent and unplug the Cycle Trainer from the
computer.

uploadIng rIdes To TraInIng peaKs

Upload ride data to Training Peaks to help you analyze and plan your training regimen.
1. Connect the Cycle Trainer to the computer as described in
2. In the Device Agent, click download from device.
3. When ride data transfer is complete, close the Device Agent and unplug the Cycle Trainer from the
computer.
to enter the main menu.
26
Connecting the Cycle Trainer.
Connecting the Cycle Trainer.