Setting System Preferences - Timex Cycle Trainer 2.0 Manuel D'utilisation

seTTIng sYsTem preferenCes

Set Cycle Trainer sounds, time standby, and display settings.
Setting Up SoUnDS
Configure settings for when the Cycle Trainer emits sounds. You can turn sounds OFF, choose MESSAGE
ONLY (the device will beep only when a message displays), or KEY AND MESSAGE (the device will beep when
messages display and when you press a button.
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight SET SYSTEM, then press ENTER.
3. Highlight the BEEPER field, then press ENTER.
4. Highlight a sound setting, then press ENTER.
Setting time-oF-Day StanDBy
Time-of-day Standby is the period of time the Cycle Trainer is idle before it automatically returns to the Time
screen. You can turn this feature OFF, or set the standby time to 5 or 10 minutes.
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight SET SYSTEM, then press ENTER.
3. Highlight TOD MODE, then press ENTER twice.
4. Highlight a standby setting, then press ENTER.
Setting Up the DiSplay
Configure how long you want the night-light to stay on when it is activated, the language in which screens
display, and whether the screen is read vertically or horizontally.
nIghT-lIghT
You can set the night-light to STAYS ON (you must press BACK to turn off the night-light once it is activated), or
set the period it stays on to 15 seconds, 30 seconds, 1 minute, or 2 minutes.
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight SET SYSTEM, then press ENTER.
3. Highlight DISPLAY, then press ENTER.
4. Highlight the BACKLIGHT field, then press ENTER.
5. Highlight a night-light setting, then press ENTER.
language
The screens can display in English, Spanish, Italian, French, German, or Simplified Chinese.
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight SET SYSTEM, then press ENTER.
3. Highlight DISPLAY, then press ENTER.
4. Highlight the LANGUAGE field, then press ENTER.
5. Highlight a language, then press ENTER.
orIenTaTIon
Set the screens to display with either VERTICAL (portrait) or HORIZONTAL (landscape) orientation.
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight SET SYSTEM, then press ENTER.
3. Highlight DISPLAY, then press ENTER.
4. Highlight the ORIENTATION field, then press ENTER.
5. Highlight an orientation, then press ENTER.
22