Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Changing a lamp bulb for LED
1. Switch the unit off and pull out the plug first.
2. Wait until the light bulb is cooled down before replacement.
3. Take out the baffle filter and use the screw driver to take out the frame as the
below pic showed
4. Replace with same type of bulb (LED 1.5W Max)
Note：Light replacement should carried out by qualified service personnel only.
• ILCOS D code for this lamp is: DSS-1.5/65-S-120/33
– LED modules –round lamp
– Max wattage: 2x1.5 W
– Voltage range: DC 12V
– Dimensions:
When handling globes hold with a cloth or gloves to
ensure perspiration does not come in contact with
the globe as this can reduce the life of the globe.
11
Publicité
Table des Matières
