Tools Needed - RIDGID R4040 Manuel D'utilisation

FEATURES
KNOW YOUR TILE SAW
See Figure 3.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
8 in. TILE CUTTING WHEEL - An 8 in. tile cutting wheel is
included with your saw.
WARNING:
Do not use wheels rated less than the speed of
this tool. Failure to heed this warning could result
in personal injury.
BEVEL LOCK KNOB - The bevel lock knob securely locks
the saw head at any bevel angle between 0º and 45º. It is
recommended that you only make bevel cuts at 0˚, 22.5˚,
and 45˚ angles.
WARNING:
Making bevel cuts at angles other than 0˚, 22.5˚,
and 45˚ angles could cause the cutting wheel to
come in contact with the sliding table resulting in
damage to the unit and/or possible serious injury.

TOOLS NEEDED

The following tools (not included or drawn to scale) are needed for assembly and alignment:
FRAMING SQUARE
ADJUSTABLE LASER ALIGNMENT SYSTEM - For more
accurate cuts, a laser guide is included with the tile saw.
When used properly, the laser guide makes accurate,
precision cutting simple and easy. Simply push the button
to turn the laser on or off.
MITER GUIDE - The easy-to-read indicator on the miter
guide shows the exact angle for a miter cut with detents at
0°, 22.5°, and 45°.
ON/OFF SWITCH - This saw has an easy access power
switch located on the saw arm. To lock the switch, install
a padlock (not included) through the hole in the switch
trigger. When the lock is installed and locked, the switch is
inoperable. Store the padlock key in another location.
SLIDING TABLE - The sliding table allows the user to slide
the workpiece into the cutting wheel for accurate cuts.
SPLASH GUARD ASSEMBLY WITH TOOLESS
REMOVABLE SIDE GUARD - The splash guard helps
contain spray and mist.
SUBMERSIBLE PUMP - The submersible pump (not shown)
provides water to the cutting wheel.
WATER TRAY EXTENSION - When cutting larger tile, the
extension keeps work area cleaner and drier.
WRENCH STORAGE - The tile saw has a convenient storage
area specifically designed for wrenches.
10 mm WRENCH
9 — English
COMBINATION SQUARE
Fig. 4