Swegon W1 Manuel Technique page 63

ModBus-register W3 applies to software after 1.12
Input register 16 bit integer register
Modbus Name
3x0001 Component Name ID
3x0002 - 0017 Component Name
3x0018 Applacation ID
3x0019 HW Serial No.
3x0020 SW version
3x0021 Not used
3x0022 Application state
3x0023 Not used
3x0024 Not used
3x0025 Time since last boot (Year)
3x0026 Time since last boot (Hours)
3x0027 Time since last boot (Minutes) 0/60
3x0028 Temp sensor regulator
3x0029 Temp sensor RU1
3x0030 Temp sensor RU2
3x0031 Temp set point RU
3x0032 Flow set point RU
3x0033 Battery level RU
3x0034 Not used
3x0035 Not used
3x0036 Not used
3x0037 Input Analog 1
3x0038 Input Analog 2
3x0039 Input Analog 3
3x0040 Input Analog 4
3x0041 Output PWM 1
3x0042 Output PWM 2
3x0043 Output PWM 3
3x0044 Output PWM 4
3x0045 Output Analog 1
3x0046 Output Analog 2
3x0047 Output Analog 3
3x0048 Output Analog 4
3x0049 PID Water Out
3x0050 PID ChangeOver Out
3x0051 Not used
3x0052 Not used
3x0053 Cool Water
3x0054 Warm Water
3x0055 SA Damper pos.
3x0056 EA Damper pos
Read only
Min/Max Remarks
0/10 ID for type of controller in Conductor and
Wise system
0/999 Name built of max 16 chr, exch chr (ASCII
standard)
0/8 0=Init, 1=Auto Normal, 2=Auto Economy,
3=AutoBoost, 4=Manual, 5=TimerFunction,
6=Stand-by, 7=Emergency, 8=NightCool
0/8760 After 8760h Year is updated
After 60min Hour is updated
Cels. Scaling 1:10
Cels. Scaling 1:10
Cels. Scaling 1:10
Setpoint in regulator form parameter or
Room Unit
Volts. Scaling 1:10
0/10000 (mV)
0/10000 (mV)
0/10000 (mV)
0/10000 (mV)
0/100 (%)
0/100 (%)
0/100 (%)
0/100 (%)
0/10000 (mV)
0/10000 (mV)
0/10000 (mV)
0/10000 (mV)
-100/100 (%)
-100/100 (%)
0/100 (%)
0/100 (%)
0/100 (%)
0/100 (%)
Service
Default
5 : 63