Required Tools; Installing The Stabilizers - Precor RBK 615 Manuel De L'utilisateur

20

Required Tools










Installing the Stabilizers

The two stabilizers containing the feet of the bike are
detached for shipment. Before performing any other assembly
tasks, bolt the stabilizers onto the main frame of the bike.
Note: The front stabilizer includes two wheels to assist in
positioning the bike.
To install the stabilizers:
1.
Assembling and Maintaining the RBK 615 Recumbent Exercise Bike
6 mm hex wrench
10 mm hex wrench
⁵₃₂-inch hex wrench
13 mm open-end, box, or socket wrench
14 mm open-end, box, or socket wrench
#2 Phillips screwdriver
Wire cutter
Fish tape
Place the rear stabilizer underneath the bracket at the
rear of the bike.
Figure 2: Rear stabilizer installation