Exposure Correction; Flash Exposure Sequences - Metz MECABLITZ 28 AF-4 N Mode D'emploi

9.3 Exposure correction

Various cameras enable the user to influence the TTL
exposure control. Accordingly, the camera's exposure
settings can be corrected by up to ± 3 apertures (in
one-third or half f-stop settings).
PLEASE NOTE: Do not forget to switch off this
function when it is no longer required!
Please refer to the camera's operating instructions
for further details.
9. Flash techniques and flash functions

9.4 Flash exposure sequences

Some cameras permit a sequence of shots to be
taken of the same subject with different exposure
parameters.
When this function is activated, three pictures - as an
example - can be taken in succession: The first shot is
made with a negative flash exposure correction (less
light output), the second is normally exposed, and the
third is taken with a positive flash exposure
correction (more light output). For further details on
this function and the settings to be made please refer
to the camera's operating instructions.
41