Disconnecting The Charger; Attaching The Belt Clip - Uniden MHS75 Guide D'utilisation

• Be careful moving the charger cord. If you have to move
the cord while the radio is charging, pick up the radio first
so you don't drop it.

Disconnecting the charger

Squeeze in on the release tabs
at the base of the charger, and
slide the radio out.

Attaching the belt clip

To attach the belt clip:
3. Place the clip on the post
and slide the clip upwards
until it clicks into place.
To remove the belt clip:
1. Rotate the clip so that
the finger indentation is
towards the bottom of the radio.
2. Slide the clip up until it comes free of the anchor post.
E-14
1.
2.
Uniden MHS75 Radio Owner's Manual
Rotate the belt clip so that the
finger indentation is towards the
top of the radio.
Align the center of the clip with
the anchor post.