Normal Mode Operation; Normal Mode With Weather Alert Watch - Uniden MHS75 Guide D'utilisation

Radio vhf maritime
Masquer les pouces Voir aussi pour MHS75:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Normal mode operation

To transmit, remove the radio from the charger, then press
and hold the Push to Talk button. Release the button
when you are finished talking.
For the best sound quality, hold the microphone about two
inches from your mouth while you're talking.
Press the
Channel Up button to move up one channel at
a time. Press and hold the button to scroll quickly up the
channels.
Press the
Channel Down button to move down one
channel at a time. Press and hold the button to scroll
quickly down the channels.
To change the transmit power, press the
button. The transmit power switches between 1 Watt and 5
Watts each time you press the 1/5W-2.5W button.
To change the transmit power to 2.5 Watts, press and
hold the 1/5W-2.5W button for 2 seconds. Press and hold
the button again to change back to the previous transmit
power (either 1 Watt or 5 Watts).

Normal mode with Weather Alert Watch

If you activate Weather Alert Watch while operating in normal
mode, the radio
checks the most
recently used
weather channel
every seven seconds.
If it detects a weather
or other hazard alert,
it will switch to that
weather channel. (If
you are actively
transmitting, the radio
waits until you finish
your transmission before checking the weather channel.)
Uniden MHS75 Radio Owner's Manual
Monitoring Channel 25
1/5W-2.5W
Every 7 seconds,
the radio checks
the last-used
weather channel.
WX Alert
Watch on
wx
E-7

Publicité

Chapitres

Table des Matières
loading

Table des Matières