Intended Use; Delivery Content; Up-To-Date Operating Instructions; Features And Functions - VOLTCRAFT VC190 SE Mode D'emploi

3. Intended use

The product is intended to be used as a digital multimeter (DMM), measured values are shown on a digital display.
The DMM can be used for professional, industrial and do-it-yourself applications up to CAT III. It is intended for indoor
use only. Contact with moisture must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can result in short circuits,
fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this
product available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

4. Delivery content

• Digital multimeter
• Test leads (pair)
• Point contact temperature probe

5. Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.

6. Features and functions

• AC / DC voltage measurement
• AC / DC current measurement up to 10 A.
• Duty cycle
• Diode test
• Acoustic continuity tester
• Hold function
• Auto power off.
34
• 9 V block battery
• Safety information
• Operating instructions (on CD-ROM)
• Automatic display backlight
• Peak reading (PEAK)
• 6000 counts
• True RMS
• Auto range
• 600 V high performance fuses
• CAT III 600 V measuring category