Sedus se:do Mode D'emploi page 8

A Height of the seat
Lowering the seat:
®
(the seat will drop slowly)
will lock the position
Raising the seat:
®
slowly) Releasing the lever at the desired height will lock the position
3.
B Height of backrest
Increasing the height of the backrest:
®
both hands, grip the backrest from below and push upwards
once at the desired height = lock in position
Release lock:
®
1.
Move backrest all the way down
2.
C Inflation of the lumbar curve (optional)
Lumbar curve activation:
®
curvature is reached
curvature
D Depth of lumbar support on mesh versions (optional)
Disengage backrest
®
1.
Sit down on the seat
1.
Releasing the lever at the desired height
3.
Stand up Pull the lever upwards (the seat will rise
1. 2.
Push backrest all the way up, and the lock will release
Pump on the upper button until the desired
1.
Press on the lower button to reduce the lumbar
2.
Turn inlay to increase or decrease support
2.
Pull the lever upwards
2.
Place load on seat
1.
Using
2.
Release
3.