Gb Instruction Manual; Intended Use; Important Safety Notes - Genie 1501 XCD Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
(GB) INSTRUCTION MANUAL
Dear customer,
Thank you for buying this high-quality product. Please carefully read through
these operating instructions before using the device for the first time. In
particular, please comply with the safety notices. Our service information is
located at the bottom of these instructions.

Intended Use

The shredder is only suitable for shredding of paper, credit cards and CDs. Any other
use or modification shall be deemed to be improper and involves substantial risk of
accidents. In the case of non-compliance, we assume no liability for the damage.

IMPORTANT SAFETY NOTES

1. Always be sure to keep all loose objects such as e.g. clothing, ties
jewellery, hair
to avoid injury.
2. Deactivate the device and disconnect the mains plug in the event the document
shredder is not used for a prolonged period of time.
3. Remove all paper clips and staples before inserting paper. Though paper clips
can be shredded, this is not recommended.
4. Always be sure to keep your fingers and hands
order to avoid serious injury.
5. The continuous shredding operation should not exceed 2 minutes in order to
prevent the motor from overheating. Should it be necessary to operate the unit
continually, it is recommended that the shredding process is restricted to 2
minutes for each operation and that the unit's motor is allowed to cool off for at
least 40 minutes in between operations.
6. The unit should be setup as closely as possible to an easily accessible wall
socket and should be accessible from all sides.
7. The document shredder must always be deactivated and disconnected from the
electrical line prior to moving, transporting, and cleaning the device and prior to
emptying the waste basket.
, and all other small objects away from the feed slot in order
away from the feed slot in
,
8

Publicité

Table des Matières
loading

Table des Matières