Getting Started - Ribimex BAT 20 Manuel D'instructions Et D'utilisation

•
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
•
Store idle power tool out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
3.3- Special warnings when using the product
•
Use personal protective equipment. Always wear safety goggles, earmuffs when using the
tool.
•
This product is designed to be powered Ribimex 20V Li-ion battery packs only.
•
Use with specifically designated Li-ion battery packs (not included). Use of other batteries
may cause fire. See Table 3 for more information.
•
Recharge the battery pack with specifically designated Ribimex chargers (not included).
Use of other chargers may cause fire. See Table 2 for more information.
•
Refer to the instruction manual of Ribimex battery pack and charger for safety, quality and
operation instructions.
IV. GETTING STARTED
4.1- Unpacking
•
Remove the product from packaging
•
Check if the product and accessories (if any) are intact.
4.2- Package Content
•
1 x Machine main body with upper tube assembly
•
1 x Lower tube assembly with wheels
•
1 x Shoulder strap
•
1 x Retaining screw
•
1 x Collection bag
•
1 x Instruction manual
4.3- Assembly
Tubes
•
Connect the lower tube assembly to the upper tube assembly.
•
Secure the lower tube assembly with the screw provided (see Fig. 1)
Page 13 / 28