Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
a waste drop-off centre; or seek advice from your local municipality.
• Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
6.3- Troubleshooting
Problem
Machine doesn't start
Machine is not operating at
full capacity
Machine stops while running
Our warranty conditions are available from our STAV department [*] and on our website.
Should you have any repair requests under the warranty, please contact your retailer or our STAV
[*] who will inform you on the procedure.
Should you have any parts and/or accessories request, you can contact our STAV [*] to ask for the
product exploded view by indicating our reference and the serial number or batch number appearing
on the nameplate.
[*] STAV = Technical and After-Sales Service department
STAV contact details:
Tel : 08 92 35 05 77 (0,34€/min ; only in France) ; email :
Internet Website:
www.ribimex.com
Possible cause
Batteries not installed
properly
Batteries are flat
Machine is faulty
Tubes clogged
Batteries exhausted
Ribimex, 56 Route de Paris, F-77340 Pontault-Combault.
Possible solution
Check and reinstall the batteries
Recharge the batteries
Contact service centre
Remove blockage and restart the
machine
Recharge the batteries
sav@ribimex.fr
Page 18 / 28
Publicité
Table des Matières
