Ribimex BAT 20 Manuel D'instructions Et D'utilisation page 15

4.4- Turn On/Off
The control wheel for ON/OFF and speed is located at the front of the rear handle. (See Fig. 6)
•
OFF: Turn the control wheel backward to "0" position.
•
ON: Turn the control wheel foreward and adjust the motor speed.
4.5- Function lever
To change the tool between vacuum mode and blower mode by turning the function lever. (See
Fig. 7)
•
Vacuum/Mulcher mode: Turn the function to position A
•
Blower mode: Turn the function to position B
Fig. 6
Fig. 5
Fig. 7
Page 15 / 28