•
Use extreme caution when reversing or pulling the product towards you.
•
Never operate the product with defective guards, or without safety devices, for example
deflectors and/or collecte bag, in place.
•
Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at
all times.
VI. MAINTENANCE AND STORAGE
WARNING!
Before any intervention on product, ensure that switch is set on the "OFF" position,
disconnect from power source and remove the battery pack.
Reminder: In order to maintain the machine in good working condition, carry out regular
maintenance of the machine after each use and before storage. Any breach or inadequate
maintenance reduces the life of the machine and increases the risk of breakdowns and accidents.
6.1- Cleaning
Before cleaning, turn off the tool, disconnect from power source and remove battery pack.
General cleaning
•
Keep the ventilation slots free from dust and dirt to prevent the machine from overheating.
•
Regularly clean the machine surface with a soft cloth, preferably after each use. If the dirt
does not come off, use a soft cloth moistened with soapy water.
WARNING!
Do not use harsh chemicals, cleaning solvents or strong detergents for cleaning the
non-metallic parts of the product. They may weaken the plastic materials.
Cleaning blocked tube/impeller
•
Wear protective gloves.
•
Remove the lower tube assembly with removing the retaining screw.
•
Remove the collection bag.
•
Check and remove blockage in the tube/impeller.
•
Rotate the impeller blade by hand to ensure the blockage is completely removed.
•
Reinstall the lower tube assembly and collection bag.
6.2- Storage
• Disconnect from power source and remove battery pack before storage.
• Clean the product before storage.
• Keep product, instruction manual and accessories (if any) in the original packaging.
• Store the product in a clean environment, where is not freezing or too hot (exceed 50 ̊ C ).
• Keep out of reach of children (e.g. lock it up).
6.3- Disposal
• Do not dispose with household garbage. Do not throw into the environment.
• Dispose of the product in a collecte centre for waste of electrical and electronic equipment, or
Page 17 / 28