Pairing The Wireless Water Detector With The Brematicpro Gateway; Cleaning The Device; Action; Disposal - brennenstuhl BREMATICPRO Mode D'emploi

For more information about the app and how to use it, please visit
www.brematic.com/en/service.
Pairing the wireless water detector with the
BrematicPRO Gateway
When linked with the Home Automation System BrematicPRO via the
BrematicPRO Gateway, it is possible to use software-based functions
with the aid of the app/BrematicPRO PC software. After the sensor
has been triggered, actions (tasks) can be triggered via the app / PC
software. For example, the wireless switch actuator of a pump can be
switched on or an email can be sent.
The app or BrematicPRO PC software is installed and open.
The BrematicPRO Gateway is ready for use.
Keep the device at least 50 cm from the Gateway.
Open the "Settings" menu.
Select the room where you wish to use the device.
Select "Add Device".
Select the frequency "868 MHz".
Under "New Device", select "Sensor / Detector" and click "Continue"
to confirm your selection.
Follow the on-screen instructions.
Press and hold the pair button on the device for 3 seconds.
Once both devices have been paired the LED will flash.
Enter a device name, e.g. water level detector.
Select "Add" to assign the device to the room.
Select "Display status" if the wireless water detector should be
displayed as a tile in the app.
In this submenu you can also add the device to your favourites.
First tap "Back" to leave the room, then "Done" to complete the
pairing process.
The wireless water detector is now connected to the Home
Automation Systems BrematicPRO.
Find more information about the app and how to use it at:
www.brematic.com/en/service

Cleaning the device

Clean the device with a dry, lint-free cloth. For tough dirt, you
may also slightly dampen the cloth.
Do not clean with solvent-based cleaners. These could damage
the device surface and markings.
Wireless water alarm 868.3 MHz
Never immerse the device in water or other liquids. The device
may otherwise be damaged.

Action

Problem Possible cause
The LED is flashing. The battery is
drained.
Device not The device is
detected. outside the
Gateway range.

Disposal

The packaging is made from environmentally-friendly
materials which can be disposed of through your local
recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please dispose of the
product properly when it has reached the end of its
useful life, not in the household waste. Please contact
your municipality for information on collection facilities
and their opening hours.
Faulty or drained batteries must be recycled in accordance with
Directive 2006/66/EC and its amendments. Return batteries and /
or the product to the provided recycling facilities.
Improper disposal of batteries can
harm the environment!
Never dispose of batteries in your household bin. They may contain
toxic heavy metals and are subject to hazardous waste regulations.
The chemical symbols of the heavy metals are: Cd = cadmium, Hg =
mercury, Pb = lead. Therefore dispose of drained batteries through
your local collection facilities.

Service

For questions related to the product, please contact us at
www.brematic.com/en/service.
Tel.: 0080048720743 (toll-free)
Action
Insert a new battery.
Reduce the distance
to the Gateway.
EN 13