Technical Specifications - GBC FUSION PLUS 6000L Mode D'emploi

service
Do not attempt to service or repair the pouch laminator yourself. Unplug the unit and contact an
authorised GBC service representative for any required repairs.

technical specifications

Fusion Plus™ 6000L Laminator
Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
getting ready to laminate
Easy Set Up
1 Remove the plastic exit tray from the box and place into the two holes on the back of the
laminator and extend to use. Ensure that there is sufficient space behind the laminator for the
item to be removed.
Take the electrical plug and place in an appropriate power source, which is near the table you
2
intend to use.
A sequence of lights will cross the control panel.
3
4 To use the laminator gently tap the 'power on' button.
NOTE: Your new laminator may emit
a slight odour during the initial
operation. Its is normal and will
diminish after a few hours of
operation.
Manual Select
Fusion Plus™ 7000L only
If you do not wish to use the Auto setting select
the pouch thickness using the arrows to scroll
until the required pouch thickness setting is
shown.
220-240V / 50/60Hz / 6.5A /
1450W
580x235x120mm
(without exit tray)
580x330x120mm
(with exit tray)
7.7kg
A3: 303mm
F U S I O N P L U S
Fusion Plus™ 7000L Laminator
Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
6 0 0 0 L & 7 0 0 0 L A 3 L A M I N A T O R S
™
220-240V / 50/60Hz / 6.5A /
1450W
580x235x120mm
(without exit tray)
580x330x120mm
(with exit tray)
8.1kg
A3: 303mm
GB
5