PNI P15UV Manuel Utilisateur page 38

31. Scanning frequencies with CTCSS (SEEK CTC)
Keys shortcut [MENU] [31]
Notes: This function cannot be activated when the radio is in channel mode. Scanning will start
only when the radio detects a signal on the receiving frequency.
32. Scanning frequencies with DCS (SEEK DCS)
Keys shortcut [MENU] [32]
Notes: This function cannot be activated when the radio is in channel mode. Scanning will start
only when the radio detects a signal on the receiving frequency.
33. Squelch tail elimination (TAIL)
Keys shortcut [MENU] [33]
This function eliminates the final squelch noise between radios that communicate directly
without a repeater. Receiving a 55Hz or 134.4Hz tone mutes the sound long enough to prevent
the reception of any final squelch noise.
34. Squelch tail elimination (RP-STE)
Keys shortcut [MENU] [34]
User manual 38