PNI P15UV Manuel Utilisateur page 22

1. Long press the MENU key to switch to VFO frequency mode. The VFO icon appears on
the screen on the right.
2. Run the key sequence [MENU] [2] [9] [MENU] [1] [0] [MENU] [EXIT] to delete all data
previously stored on channel 10.
3. Execute the key sequence [MENU] [1] [3] [MENU] 123.0 [MENU] [EXIT] to enter the TX
encoding tone.
4. Enter the RX frequency (Ex. 43255000)
5. Execute the key sequence [MENU] [2] [8] [MENU] [1] [0] [MENU] to select the channel
(for example: 10)
6. Press the [EXIT] key. RX frequency added.
7. Enter the TX frequency (Ex. 43755000)
8. Execute the key sequence [MENU] [2] [8] [MENU] [1] [0] [MENU] to select the same
channel (for example: 10)
9. Press the [EXIT] key. TX frequency added.
10. Hold down the MENU key to switch to MR channel mode. The saved channel number and
the set reception and transmission frequency will appear on the screen.
User manual 22