PNI P15UV Manuel Utilisateur page 18

Press the SCAN key or PTT key again to stop scanning.
The scan mode can be set in menu no. 20. Press MENU - [2] - [0]
Channel scanning
In channel mode, long press the SCAN key. The radio will start scanning the set channels.
You can change the scanning direction using the keys ▲/▼
The scan mode can be set in menu no. 20. Press MENU - [2] - [0]
CTCSS scanning
This function allows scanning of frequencies that have activated CTCSS tones.
Press the MENU keys - [3] - [1]
SEEK 67.0Hz will appear on the screen
Press the MENU key to start scanning. Press the EXIT key to stop scanning.
Note: This function cannot be activated if the radio is in channel mode.
DCS scanning
This function allows scanning of frequencies that have DCS codes activated.
Press the MENU keys - [3] - [2]
User manual 18