Sub-Menu 02.03. Weekly Programme - Bronpi Karina Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
By pressing buttons 1 and 2 we change the value "OFF" and set the start of the first start hour:
6.2.3.3.

SUB-MENU 02.03. WEEKLY PROGRAMME

NOTE: Please, make the set up carefully in order to avoid hour' superposition and/or inactivate the same day in different
programmes.
If we intend to make a weekly set up of the boiler we need to take into account that, in this occasion, we have 2 different hours to start and
stop, and we must set every day of the week its activation or not to this hour interval. In order to activate them we need to start from the
following screen:
By pressing once button 3 we access to the weekly programming submenu of the boiler and, by default, the following screen will be shown:
We need to change the option "OFF" by "ON" by pressing buttons nº1 and nº2 to confirm the machine that the programme has been chosen:
We must now choose the schedules. To do this, we have two different starts hours:
- PROGRAM 1: START 1
- PROGRAM 2: START 2
We do not have a menu where we can establish a stop specific hour but the time established or the previous fill of the hopper cause the stop
of the geared engine.
After this, we need to select the activation or deactivation of each programme depending on the day of the week:
-
Programme 1: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF), Friday (ON), Saturday (ON), and Sunday (OFF.)
-
Programme 2: Monday (OFF), Tuesday (OFF), Wednesday (ON), Thursday (OFF), Friday (OFF), Saturday (ON), and Sunday (ON.)
OPERATING INSTRUCTIONS
OFF
M - 2 - 2 - 02
START 1
DAY
09:00
M - 2 - 2 - 02
START 1
DAY
M - 2 - 3
PROGRAMME
WEEK
OFF
M - 2 - 3 - 01
PROGRAMME
WEEK
ON
M - 2 - 3 - 01
PROGRAMME
WEEK
12:00
M - 2 - 3 - 02
START
PROG-1
19
1000 L AUXILIARY TANK

Publicité

Table des Matières
loading

Table des Matières